Industrial garlic peeling machine is an indispensable equipment in modern garlic processing, which can greatly improve production efficiency and reduce manual operation. However, in the process of long-term use, the equipment will inevitably have some problems. This article will introduce three common failures and their solutions to help you better maintain and use the commercial garlic peeler.
Poor peeling effect
Problem description:
When the peeling effect of the industrial garlic peeling machine decreases, the garlic skin may not be removed cleanly or the peeling rate is low. This problem often affects productivity and increases subsequent cleanup.
Solution:
First check whether the air pressure system is normal, low air pressure will lead to poor peeling effect. Make sure the air pressure is in the standard range required by the machine. Secondly, check the blades inside the machine for wear and tear, dull blades will cause poor peeling results. Clean the blades and airways regularly to ensure the machine runs smoothly. Finally, make sure that the size of the garlic is suitable for the equipment specifications; garlic that is too large or too small will affect the peeling results.
Machine jams or stops working
Problem description:
Sometimes the peeler machine will stall or stop working altogether during operation. This is usually caused by wear and tear or blockage of internal parts of the machine.
Solution:
First, turn off the power and inspect the inside of the unit for foreign objects or dirt buildup, especially in the drive section. If debris or dirt is found, clean it promptly. Second, check the lubrication status of the motor and transmission system, lack of lubrication will lead to excessive friction and cause jamming. Regularly check and replace worn parts to keep the industrial garlic peeling machine running smoothly.
Excessive noise
Problem description:
Excessive noise is another common problem, and it is usually caused by loose or damaged mechanical parts. Excessive noise not only affects the working environment, but can also be a precursor to equipment failure.
Solution:
First, check the individual screws and connections of the garlic peel machine to make sure they are not loose. Loose parts can produce vibration and noise, affecting the stability of the machine. Second, check the bearings of the motor and other rotating parts. Worn or oil-starved bearings may cause abnormal noise when the machine is running. Conduct regular bearing inspection and lubrication to reduce friction and noise.
The common problems of industrial garlic peeling machine and their solutions are introduced above. In order to ensure the long-term stable operation of the machine, users should regularly check the air pressure, blades, lubrication system and other key parts of the equipment, troubleshooting in time to ensure productivity. If you encounter problems that can not be solved, it is recommended to contact professional maintenance personnel to deal with them.
